Figure 2 | NPG Asia Materials

Figure 2

From: Cu/Li4Ti5O12 scaffolds as superior anodes for lithium-ion batteries

Figure 2

Structural analysis of a Cu/LTO scaffold anode: (a, b) scanning electronic microscopy and transmission electron microscopy (TEM) images of an as-made bicontinuous three-dimensional copper scaffold template after dealloying treatment. Inset shows the schematic representation of a piece of the Cu scaffold. (c, d) Low- and high-magnification TEM images of the Cu/LTO sample. Inset showing the schematic drawing of the Cu/LTO.

Back to article page