Supplementary Figure 6: Graphical user interface of the Roadrunner goniometer. | Nature Methods

Supplementary Figure 6: Graphical user interface of the Roadrunner goniometer.

From: High-speed fixed-target serial virus crystallography

Supplementary Figure 6

On the left side of the graphical user interface the image of the inline sample-viewing microscope is displayed – showing a chip mounted on the goniometer. The distance between the pores of the chip shown is 10 μm and the pore diameter ~5 μm. The red dot in the center of the image represents the X-ray beam position. The green and yellow lines are support lines to define the scan grid. Below the microscope image and on the right side of the GUI several control parameters and motor positions are displayed and can be adjusted.

Back to article page