Fig. 3: Water bath testing set up showing the precision temperature being set by a heater. | BDJ Open

Fig. 3: Water bath testing set up showing the precision temperature being set by a heater.

From: Determining the performance of a temperature sensor embedded into a mouthguard

Fig. 3

The temperature of a 9 l water bath was set to 34.0 °C. An Input Wired Digital Thermometer and the instrumented mouthguard were sampled by the PC GUI program using a MAX30208 Evaluation System. Both the sensor of the Wired Digital Thermometer and the mouthguard are submerged in the water bath.

Back to article page