Table 5 Published standards applicable to computed tomography (CT)
From: Quality control methods in musculoskeletal tissue engineering: from imaging to biosensors
Standard code | Standard title | Brief description of document |
|---|---|---|
ISO 15708-1:2017 | Nondestructive testing - Radiation methods for computed tomography - Part 1: Terminology | Describes the terms used in the field of computed tomography (CT) |
ISO 15708-2:2017 | Nondestructive testing - Radiation methods for computed tomography - Part 2: Principles, equipment and samples | Describes the general principles of X -ray CT |
ISO 15708-3:2017 | Nondestructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation | Provides technical information to enable the selection of suitable data acquisition and image reconstruction parameters for the interpretation of results |
ISO 15708-4:2017 | Nondestructive testing - Radiation methods for computed tomography - Part 4: Qualification | Provides a set of CT performance parameter definitions and their relation to CT system specification |
ASTM E1441-19 | Standard Guide for Computed Tomography (CT) | Describes the general principles of X -ray CT |
ASTM E1570-19 | Standard Practice for Fan Beam Computed Tomographic (CT) Examination | Establishes the minimum requirements for computed tomography (CT) examination |
ASTM E1672-12 | Standard Guide for Computed Tomography (CT) System Selection | Provides a common terminology to guide both purchaser and supplier in the CT system selection process |
ASTM E1695-95 (Reapproved 2013) | Standard Test Method for Measurement of Computed Tomography (CT) System Performance | Describes the method to determine the spatial resolution and the contrast sensitivity of an X-ray CT system |
