Fig. 2: Comparison of electrochemical properties of LiFSI/DME and LiFSI–LiNO3/DME. | Nature Communications

Fig. 2: Comparison of electrochemical properties of LiFSI/DME and LiFSI–LiNO3/DME.

From: Engineering a passivating electric double layer for high performance lithium metal batteries

Fig. 2

a Oxidative stability measured via LSV for Li | |Al cells. b Rate capability of Li | |NMC811 cells under different charging/discharging rates. c Long-term cycle performance of Li | |NMC811 cells using different electrolytes at 1.0 C rate. d Self-discharge tests after a potentiostatic hold at 4.3 V vs Li/Li+. e Typical current relaxation curves collected from Li | |NMC811 half-cells during a potentiostatic hold at 4.3 V vs Li/Li+.

Back to article page