Fig. 2: Characterization of the printed material. | Nature Communications

Fig. 2: Characterization of the printed material.

From: Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability

Fig. 2

a Stress-strain curves of G50 to G0; b Stress-strain curves of G60 and G70; c Schematic of recovering of the network and photo comparison of G60 sample before and after 10000 fatigue cycles; d Fatigue test of G60 sample with an applied strain between 200 to 300%; e Correlation of Young’s modulus and glass transition temperature with grayscale levels; f A comparison of the mechanical property range between the single vat g-DLP printing with general reported or commercially available DLP ink20,25,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49.

Back to article page