Fig. 2: Simulation results of the four cases.
From: Digital twin based monitoring and control for DC-DC converters
a The output voltage when the reference voltage is changed from 0 V to 48 V and from 48 V to 20 V. b The output voltage when the input voltage is changed from 100 V to 90 V, and then from 90 V to 80 V. c The output voltage when controller failure is detected and replaced by the DT controller to ensure a functioning system. d SiC MOSFET is used as the switch in the circuit as the case in (c). Source data are provided as a Source Data file.
