Table 1 Parameters used in eSCM simulation.

From: The electrode tortuosity factor: why the conventional tortuosity factor is not well suited for quantifying transport in porous Li-ion battery electrodes and what to use instead

Parameters

Value

\(\kappa _0\)

\(0.046\)1\({\mathrm{S}}\,{\mathrm{m}}^{ - 1}\)

\(c_{{\mathrm{dl}}}\) (per unit active surface area)

\(0.01\)2 \({\mathrm{F}}\,{\mathrm{m}}^{ - 2}\)

\(f\)

\(10^7 - 10^{ - 1}\)a Hz

Voxel size

\(1 \times 1 \times 1\)a µm3

  1. 1The electrolyte conductivity is chosen from ref. 16 for 10 mM blocking electrolyte of salt TBAClO4.
  2. 2The interfacial double layer capacitance per unit microstructural electrode active surface area is chosen from refs 9,16.
  3. aAssumed values.
Back to article page