Fig. 3: Mechanical properties of uncured and cured aerogel–silicone composites. | npj Flexible Electronics

Fig. 3: Mechanical properties of uncured and cured aerogel–silicone composites.

From: Flexible thermoelectric generator with liquid metal interconnects and low thermal conductivity silicone filler

Fig. 3

a Viscosity of the uncured elastomer. b Young’s modulus of the composite plotted against the aerogel volume fraction for two different aerogel particle sizes. c Percent elongation at break plotted as a function of the aerogel volume fraction. d Tensile strength of the composite plotted against aerogel volume fraction. Error bars indicate standard deviations.

Back to article page