Fig. 4: Stability of the Ag BMs/ePI electrode. | npj Flexible Electronics

Fig. 4: Stability of the Ag BMs/ePI electrode.

From: Ultra-high temperature tolerant flexible transparent electrode with embedded silver nanowires bundle micromesh for electrical heater

Fig. 4

a Sheet resistance change of the Ag BMs/ePI and Ag BMs/PIs exposure to air at room temperature. b Chemical stability of Ag BMs/ePI electrode in different solvents for 1 h, including deionized water, isopropyl alcohol, ethanol, acetone, and toluene. c Chemical stability of Ag BMs/ePI electrodes in acid (HCl, pH = 1.0) and alkaline (NaOH, pH = 12.0) solutions for 1 h. d Adhesion test of Ag BMs/ePI electrode by using 3 M scotch 600 tape. e Sheet resistance change of Ag BMs/ePI conducting film as a function of the number of tensile and compressive bending with curvature radius of 1.5 mm. Insets showed the demonstration of electrode bend in tension and compression modes. f Real-time monitoring of the resistance changes of Ag BMs/ePI electrode during bending process. Insets were the photographs of stable LED lighting connected to the electrode.

Back to article page