Fig. 5: Heating characteristics of the Ag BMs/ePI electrode. | npj Flexible Electronics

Fig. 5: Heating characteristics of the Ag BMs/ePI electrode.

From: Ultra-high temperature tolerant flexible transparent electrode with embedded silver nanowires bundle micromesh for electrical heater

Fig. 5

a Schematic diagram for the heating and cooling process for Ag BMs/ePI heater. b Time-dependent surface temperature of the flexible transparent Ag BMs/ePI heater (Rs ~10 ohm sq−1, 2 cm × 2 cm) with different supplied voltages. c Response and cooling time of the Ag BMs/ePI heater at 8 V constant voltage. d Long-term time-dependent surface temperature of the Ag BMs/ePI heater at 4 V. Inset was the IR camera image of the real device. e Heating stability and repeatability of the Ag BMs/ePI heater at 4 V, corresponding to the first 6 cycles (left) and the last 6 cycles (right).

Back to article page