Extended Data Fig. 6: Temperature-dependent volatile and nonvolatile resistive-switching under varying current compliance. | Nature Nanotechnology

Extended Data Fig. 6: Temperature-dependent volatile and nonvolatile resistive-switching under varying current compliance.

From: Ultrawide-bandwidth boron nitride photonic memristors

Extended Data Fig. 6

(a–c) Volatile current–voltage (I–V) characteristics measured under white LED illumination with low current compliance (CC = 100 nA). Grey lines represent ten consecutive switching cycles; a representative cycle is highlighted in blue. Measurements were carried out at (a) 20 °C, (b) 125 °C and (c) 300 °C. The absolute current |I| is shown on a logarithmic scale against applied voltage V; the dashed line marks the 100 nA compliance. (d–f) Nonvolatile I–V characteristics recorded under identical illumination conditions with high current compliance (CC = 100 µA). Grey lines depict cycle-to-cycle variability; a typical switching curve is shown in red. Data were acquired at (d) 20 °C, (e) 125 °C and (f) 300 °C. The dashed line indicates the 100 µA compliance.

Back to article page