Supplementary Figure 6: SNACS noise characterization.
From: Noninvasive monitoring of single-cell mechanics by acoustic scattering
a, Continuous SNACS measurements of a single 12-μm polystyrene bead (n = 79 repeated measurements), implementing the same fluidic control strategy for continuous monitoring of single-cell SNACS (Fig. 3a). The mean (set to zero) is shown by the red line, and ± s.d. (σ) is shown by the gray dashed lines. The gray area marks the data region within ±σ. b,c, Illustration (top) and simulation results (bottom) of the cell model (Fig. 2a) with total radius (rc) and shell elastic modulus (Emod) of 6 μm and 5 MPa, respectively, with x-positional (b) and z-positional (c) offset from center of the channel. Vertical lines mark the offset distance from the center to positions where the outer surface of the cell touches channel walls.
