Table 3 Label set description.
From: Production Data Set for five-Axis CNC Milling with multiple Changeovers
Label set | No. of phases | Description |
|---|---|---|
Label_01 | 73 | 73 different phases observed during production and changeover |
Label_02 | 3 | Currently produced product |
Label_03 | 2 | Production and changeover |
Label_04 | 4 | Same as Label_03, but changeover is divided into start, mid, and end phase |
Label_05 | 6 | Combines Label_02 and Label_03 |
Label_06 | 4 | Extends Label_03 by interruption phases during changeover and production |
Label_07 | 3 | Interruption phases from Label_06 are combined |
Label_08 | 12 | Distinguishes Label_02 into which product is produced now and was produced before |
Label_09 | 7 | Production phases of Label_08 are combined into one |
Label_10 | 43 | Phases from the changeover standard, combines phases from Label_01 |
