Table 1 Parameters used in the model.
Anatomical Parameters | Value | Source |
|---|---|---|
Thickness of EC, \({\ell }_{p}\) | 700 nm | |
Height of break in TJ, 2B | 25 nm | calculated from Jv for each data point, average value shown |
Height of TJ, 2bs | 2 nm | |
Width of break in TJ, WB | 150 nm | |
Width of TJ, WTJ | 2490 nm | |
Junction length per unit EC monolayer area, Ljt | 1300 cm/cm2 | measured in present study |
Fraction of junction length that is TJ, \(f\) | 0.94 | \(f=\frac{{W}_{TJ}}{{W}_{TJ}+{W}_{B}}\) |
Area of EC monolayer, Am | 1.1 cm2 | Transwell growth area |
Fluid Properties | ||
Viscosity, μ | 0.00078 Pa/s | |
Permittivity, ε | 7.08 × 10−10 F/m | |
Conductivity, σ | 1.5 S/m | |
Applied Forces | ||
Pressure drop, Δp | 980.7 N/m2 | applied in present study |
Current density, Ji | 9.1 A/m2 | applied in present study |
