Figure 5 | Scientific Reports

Figure 5

From: A crystal plasticity FEM study of through-thickness deformation and texture in a {112} <111> aluminium single crystal during accumulative roll-bonding

Figure 5

Distribution of texture components through the whole thickness after 3-, 4-, 5-, 7- and 9-cycle in the (a) experiment16, (b) simulation40. (c) Changes in area fractions of Dn, roCube and Dp16,40, where all elements in steady state deformation region were considered. A tolerance of 10° was used to classify crystal orientations in (a–c).

Back to article page