Figure 3
Comparison between simulation data and model prediction for the NG-LMO system with only the Anode SEI model. (a) The discharge profiles obtained from ECT simulations using the Anode SEI model. (b) The reduced parameter representation of the discharge curves in the new system (bold lines) and the model prediction (circles) with the parameter values mentioned in the legend. (c) The comparison of the capacity loss (available capacity) obtained from the simulations and the prediction from the model. The time taken for full discharge over a cycle is taken as a measure of the capacity. (d) The comparison of the resistance induced loss obtained from the simulations and the prediction from the model. The voltage at the start of discharge (Vmax) is taken as a measure to predict the resistance induced loss. The maximum error between the predicted and actual data is <0.5%.
