Figure 2 | Scientific Reports

Figure 2

From: Integration of a soft dielectric composite into a cantilever beam for mechanical energy harvesting, comparison between capacitive and triboelectric transducers

Figure 2

(A) Average power \(P\) converted to a steady-state by the continuous conditioning circuit for different DC voltage bias E against \({R}_{load}\). The black dashed line highlights the optimal load resistance (B) Average power \(P\) converted to a steady-state by the continuous conditioning circuit against E (with \({R}_{load}={R}_{opt}\) (C) \({(U}_{{C}_{var}},q\left(t\right))\) cycles corresponding to steady-state operation of the continuous conditioning circuit for different load resistances. (D) Average power \(P\) converted to a steady-state by the continuous conditioning circuit against \(\Delta C={C}_{max}-{C}_{min}\), for \({R}_{load}={R}_{optimal}\) and E = 100 V.

Back to article page