Table 2 Machining parameters of ECFG.
Machining parameter | Value |
|---|---|
Abrasive particle size (μm) | 74 |
Rotating speed r (rpm) | 2400, 3000, 3600, 4200, 4800 |
Feed rate (mm/min) | 0.2, 0.4, 0.6, 0.8, 1.0 |
Number of through-holes of grinding head | 12 |
Through-hole diameter d (mm) | 0.5 |
Applied voltage U (V) | 10 |
Power duty cycle | 50% |
Power frequency (Hz) | 1000 |
Inlet pressure Pin (MPa) | 0.2, 0.25, 0.3, 0.35, 0.4 |
Electrolyte conductivity κ (S/m) | 7.9 |
