Table 10 ANOVA general linear model for drilled PP and GFR/PP under different drilling conditions.
From: Comparison between bearing strengths of molded-in and machined holes of GFR/PP composites
Source | DF | LFPP | SFPP | ||||||
|---|---|---|---|---|---|---|---|---|---|
Adj SS | Adj MS | F-value | p-value | Adj SS | Adj MS | F-value | p-value | ||
Wt% | 3 | 270.50 | 90.17 | 16.49 | 0.003 | 4.702 | 1.57 | 0.49 | 0.703 |
Speed | 3 | 50.4 | 16.8 | 3.07 | 0.112 | 126.09 | 42.03 | 13.1 | 0.005 |
Feed | 3 | 0.339 | 0.113 | 0.02 | 0.996 | 14.54 | 4.85 | 1.51 | 0.305 |
Error | 6 | 32.806 | 5.4676 | Â | Â | 19.252 | 3.209 | Â | Â |
Total | 15 | 354.04 | Â | Â | Â | 164.578 | Â | Â | Â |
