Table 2 Processing parameters of FFF for manufacturing PEEK-PLA/WS/HA scaffolds.
From: Fabrication and properties of interweaved poly(ether ether ketone) composite scaffolds
Parameter | PEEK | PLA/WS/HA |
|---|---|---|
Nozzle heater temperature (°C) | 410 | 210 |
Printing speed (mm/s) | 20 | 50 |
Layer thickness (mm) | 0.1 | 0.1 |
Platform temperature (°C) | 70 | 70 |
Retraction length (mm) | 30 | 30 |
Fill density (%) | 100 | 100 |
Supporting | √ | / |
Platform material | Polycarbonate plate | |
