Table 3 The mechanic’s properties and geometric parameters of different faults.
Fault type | In-site stress | Lithology | |||
|---|---|---|---|---|---|
Vertical stress (MPa) | Maximum horizontal stress (MPa) | Minimum horizontal stress (MPa) | a | b | |
Dip-slip fault | 51 | 34 | 20 | 0.014 | 0.011 |
Stick strike-slip | 34 | 51 | 20 | 0.014 | 0.011 |
Stable strike-slip | 34 | 51 | 20 | 0.011 | 0.014 |
