Table 2 Arrangement of the levels to the factors.
From: 3D printing of continuous cotton thread reinforced poly (lactic acid)
Level (i) | CCT diameter (D, mm) | Nozzle temperature (T, °C) | Printing speed (V, mm/s) |
|---|---|---|---|
1 | 0.6 | 200 | 6 |
2 | 0.8 | 210 | 8 |
3 | 1.0 | 220 | 10 |
From: 3D printing of continuous cotton thread reinforced poly (lactic acid)
Level (i) | CCT diameter (D, mm) | Nozzle temperature (T, °C) | Printing speed (V, mm/s) |
|---|---|---|---|
1 | 0.6 | 200 | 6 |
2 | 0.8 | 210 | 8 |
3 | 1.0 | 220 | 10 |
