Table 2 Point composition analysis of grain class 1.0/2.0 mm using WDS-EDS method (as in Fig. 5A).
No. | Fe | Cu | Zn | Ga | Ge | Ag | In | Sn | Pb |
|---|---|---|---|---|---|---|---|---|---|
% mass. | |||||||||
1 | 0.05 | 56.67 | 0.00 | 0.00 | 0.74 | 0.00 | 0.39 | 38.23 | 3.92 |
2 | 0.80 | 0.85 | 39.12 | 1.71 | 17.48 | 0.16 | 3.46 | 27.40 | 9.01 |
3 | 0.19 | 0.73 | 0.22 | 0.00 | 0.44 | 0.06 | 0.45 | 5.00 | 92.75 |
4 | 0.16 | 0.10 | 0.52 | 0.00 | 0.10 | 0.12 | 0.88 | 15.75 | 82.37 |
5 | 0.50 | 0.27 | 1.69 | 0.00 | 2.86 | 0.33 | 3.80 | 30.82 | 59.72 |
6 | 0.00 | 1.98 | 0.00 | 0.00 | 0.32 | 0.00 | 47.44 | 10.85 | 39.41 |
