Fig. 8
Cross sections for profile X-X’ in Fig. 1. (a) Elevation; (b) depth to Proterozoic basement; (c) Bouguer gravity (black line) and modelled (blue line); (d) resistivity from 3D model, density (in g/cm3) derived from regional shear-wave velocity model47. Also shown are: thick black dashed line as an inferred Moho defined by the 3.3 g/cm3 density; medium black dashed line AusMoho38; thin black dashed line depth to Proterozoic basement; white dots are depths to idealised line-source for gravity anomalies G1-G4. Cratons and Provinces: MP - Musgrave Province; AP – Arunta Province. Basins: OB – Officer Basin; AB – Amadeus Basin; GB – Georgina Basin; NB – Ngalia Basin. Elevation and gravity data were sourced from Geoscience Australia’s Geophysical Archive Data Delivery System (https://portal.ga.gov.au/persona/gadds) released under a CC BY 4.0 license (https://www.ga.gov.au/copyright). The density model was derived from the velocity model (https://doi.org/10.25919/m2a2-qb97) released under a CC BY 4.0 license (https://research.csiro.au/dap/licences/csiro-data-licence/). Depth to Proterozoic basement were obtained from Geognostics OZ SEEBASE® 2021 (https://www.geognostics.com/oz-seebase-2021) released under a CC BY 4.0 license. Figures generated using Viridien Geotools V.4.0.3.12574 (https://www.viridiengroup.com/expertise/multiphysics-imaging/geotools) and Inkscape V1.2.1 (https://inkscape.org/cs).
