Fig. 10 | Scientific Reports

Fig. 10

From: A system solution for a 100 kA class high temperature superconducting line for HL-LHC and for wider energy applications

Fig. 10

One-hour steady state test current in all circuits (2 kA in the Trim circuit, 2 kA in the Corrector circuits, 15 kA in the Separation Dipole circuit and 18 kA in the Quadrupole circuit). Ramp rates ranging from 5 A/s to 20 A/s were adopted. The mass flow rate through the system in nominal operating conditions is 4.9 ± 0.1 g/s. On the left the total current is reported. On the right the individual current in each circuit is reported.

Back to article page