Table 1 Material name, lot number, specification, manufacturer and composition.
Material name | Specification | Composition | Manufacturer | Lot number |
|---|---|---|---|---|
President dental etching gel | Etchant | 37% phosphoric acid solution | President Dental; Munich, Germany | #PD9D0237 |
Prime and bond universal | Light cured universal adhesive | PENTA, 10MDP, Active GuardTM Technology crosslinker, isopropanol, water, initiator, stabilizer | Dentsply De Trey GmbH, Konstanz, Germany | #2,101,001,077 |
Zenit | Light cured, universal nanoceramic composite | UDMA, Butanediol MA, Bis GMA. Pyrogenic silica 12 nm Glass filler. 7 μm Agglomerated nanoparticles 0.6 μm. The total filling weight is 83% by (70% in volume) | President Dental; Munich, Germany | #2,019,009,766 |
Neo Spectra™ ST | Light cured, universal nanoceramic composite | Methacrylate modified polysiloxane (organically modified ceramic) Di methacrylate resins, ethyl-4 (dimethylamine) benzoate, and bis(4-methyl-phenyl) iodonium hexafluorophosphate. Filler load: 78–80% by weight (57% by volume): Spherical, pre-polymerized Sphere TEC fillers (d3,50 ≈ 15 μm), non-agglomerated barium glass and ytterbium fluoride | Dentsply, Konstanz, Germany | #2,102,001,020 |
Dynamic flow | A low viscosity, visible light curing flowable resin composite | BIS-GMA, UDMA.Bis-Ema TMPTMA Barium aliminium boro silicate | President Dental; Munich, Germany | #2,019,009,766 |
