Fig. 1 | Scientific Reports

Fig. 1

From: Ion beam induced secondary electron tomography of acrylonitrile-styrene-acrylate/polycarbonate polymer blends for fused filament fabrication and injection moulding

Fig. 1

(a) SEM image of a fractured bead of the printed object in cross-section, where the square Pt deposition can be observed; (b) and (c) SEM images showing different steps of the milling of the U-pattern around the region of interest; (d) SEM image showing the fiducial markers milled next to the region of interest. The surface of interest is delineated by a red dashed line.

Back to article page