Fig. 6: Stability of generated microcomb. | Communications Physics

Fig. 6: Stability of generated microcomb.

From: Genetic algorithm-enhanced microcomb state generation

Fig. 6

Grey dots show the standard deviation of intensity value per comb line, measured over one day. The microcomb state (blue) is reproduced using the optimized parameters located by the GA. The inset shows the recorded power transmission trace at the through port of the MRR as the laser frequency is scanned to reproduce the microcomb, clearly showing the step-in power associated with SCs, as specified in the fitness function during the GA search.

Back to article page