Fig. 5: Comparison between FE-model and the experimental data. | Communications Materials

Fig. 5: Comparison between FE-model and the experimental data.

From: Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

Fig. 5

Modeled and experimental σvon Mises distributions are shown in for LS1, LS2, and LS3 in (a–c) as well as (d–f), respectively. The evaluated crack tip von Mises stresses are presented in (d–f), respectively, where the full and open symbols indicate the experimental and modeled data. The error bars in (g–i) depict the standard deviation of the experimental stress results.

Back to article page