Table 2 Printing parameters for linear-gradient and 90 wt.% P91 build fabricated using WAAM
Build type | Layer No. | P91 content (wt.%) | Current (A) | Travel speed (mm/s) | Wire feed (m/min) | |
|---|---|---|---|---|---|---|
P91 | 740H | |||||
Linear gradient | 25–40 | 0 | 166 | 5 | - | 2.44 |
23–24 | 10 | 166 | 5 | 0.31 | 2.19 | |
22 | 20 | 166 | 5 | 0.63 | 1.95 | |
21 | 30 | 166 | 5 | 0.94 | 1.70 | |
20 | 40 | 166 | 5 | 1.26 | 1.46 | |
19 | 50 | 166 | 5 | 1.57 | 1.22 | |
18 | 60 | 166 | 5 | 1.88 | 0.97 | |
17 | 70 | 166 | 5 | 2.20 | 0.73 | |
16 | 80 | 166 | 5 | 2.51 | 0.49 | |
13–15 | 90 | 166 | 5 | 2.83 | 0.24 | |
3–12 | 100 | 166 | 5 | 3.10 | - | |
2 | 100 | 200 | 4 | 2.90 | - | |
1 | 100 | 220 | 3.5 | 2.90 | - | |
90 wt.% P91 | 6–62 | 90 | 166 | 5 | 2.83 | 0.24 |
5 | 90 | 175 | 5 | 2.83 | 0.24 | |
4 | 90 | 195 | 5 | 2.83 | 0.24 | |
3 | 90 | 205 | 5 | 2.83 | 0.24 | |
2 | 90 | 215 | 4 | 2.83 | 0.24 | |
1 | 90 | 255 | 3.5 | 2.83 | 0.24 | |
