Table 3 Exam card MP2RAGE slab.
From: Multi-modal ultra-high resolution structural 7-Tesla MRI data repository
General | |
|---|---|
TA | 9:07 |
PAT | 2 |
Voxel size | 0.6×0.6×0.6 mm |
Rel. SNR | 1.0 |
Properties | |
Prio Recon | Off |
Load to viewer | On |
Inline movie | Off |
Auto store images | On |
Load to stamp segments | Off |
Load images to graphic segments | Off |
Auto open inline display | Off |
Start measurement without further preparation | On |
Wait for user to start | Off |
Start measurements | single |
Routine | |
Slab group 1 | |
Slabs | 1 |
Dist. factor | 50% |
Position | R2.4 A29.1 H23.0 |
Orientation | T>C-23.0 |
Phase enc. dir. | R>>L |
Rotation | 90.00 deg |
Phase oversampling | 0% |
Slice oversampling | 100.0% |
Slices per slab | 128 |
FoV read | 192 mm |
FoV phase | 81.3% |
Slice thickness | 0.60 mm |
TR | 5,000 ms |
TE | 3.71 ms |
Averages | 1 |
Concatenations | 1 |
Filter | None |
Coil elements | A24 |
Contrast | |
Magn. Preparation | Non-sel. IR |
TI 1 | 900 ms |
TI 2 | 2,750 ms |
Flip angle 1 | 5 deg |
Flip angle 2 | 3 deg |
Fat suppr. | None |
Water suppr. | None |
2nd Inversion-Contrast | On |
Averaging mode | Long term |
Reconstruction | Magnitiude |
Measurements | 1 |
Multiple series | Each measurement |
Resolution | |
Base resolution | 320 |
Phase resolution | 100% |
Slice resolution | 100% |
Phase partial Fourier | 6/8 |
Slice partial Fourier | 6/8 |
Interpolation | Off |
PAT mode | GRAPPA |
Accel. factor PE | 2 |
Ref. lines PE | 24 |
Accel. factor 3D | 1 |
Reference scan mode | Integrated |
Image Filter | Off |
Distortion Corr. | Off |
Prescan Normalize | Off |
Normalize | Off |
B1 filter | Off |
Raw filter | Off |
Elliptical filter | Off |
Geometry | |
Multi-slice mode | Single shot |
Series | Interleaved |
Table position | H |
Table position | 0 mm |
Inline Composing | Off |
System | |
V24 | Off |
A24 | On |
Positioning mode | FIX |
MSMA | S-C-T |
Sagittal | R >>L |
Coronal | A>>P |
Transversal | F>>H |
Save uncombined | Off |
Coil Combine Mode | Adaptive Combine |
AutoAlign | --- |
Auto Coil Select | Off |
Shim mode | Standard |
Adjust with body coil | Off |
Confirm freq. adjustment | Off |
Assume Silicone | Off |
Ref. amplitude 1H | 0.000 V |
Adjustment Tolerance | Auto |
Adjust volume | |
Position | R2.4 A29.1 H23.0 |
Orientation | T>C-23.0 |
Rotation | 90.00 deg |
A>>P | 192 mm |
R>>L | 156 mm |
F>>H | 77 mm |
Physio | |
1st Signal/Mode | None |
Dark blood | Off |
Resp. control | Off |
Inline | |
Subtract | Off |
Std-Dev-Sag | Off |
Std-Dev-Cor | Off |
Std-Dev-Tra | Off |
Std-Dev-Time | Off |
MIP-Sag | Off |
MIP-Cor | Off |
MIP-Tra | Off |
MIP-Time | Off |
Save original images | On |
Sequence | |
Introduction | On |
Dimension | 3D |
Elliptical scanning | Off |
Asymmetric echo | Allowed |
Contrasts | 1 |
Bandwidth | 240 Hz/Px |
Flow comp. | Slice |
Echo spacing | 7.5 ms |
RF pulse type | Fast |
Gradinet mode | Whisper |
Excitation | Slab-sel. |
RF spoiling | On |
FFT Scale Factor | 100% |
Line/Partition Swap | Off |
Homodyne Phase Filter | Off |
Flat Image | On |
T1 Map | On |
Division Image | Off |
ExtInvPulseOn | On |
OffResFreqInv | 0 |
Invflipangle | 1,800 |
