Figure 1 | Scientific Reports

Figure 1

From: Selectively manipulable acoustic-powered microswimmers

Figure 1

Fabrication and design of microswimmers.

(a), Schematic of the fabrication setup. PEG solution containingphotosensitive initiator is sandwiched between glass slides. Theswimmers' geometries and the conical shaped indents were createdby exposing the oligomer solution to UV light passing through a maskcontaining the blueprint of the swimmers. (b), Indentation diameter versusUV exposure time. (c), Indentation depth versus UV exposure time. (d),Images showing the decrease in indentation depth for increasing UV exposuretime.

Back to article page