Table 1 Quantitive comparison of optimized and circle trajectories.
From: Object Specific Trajectory Optimization for Industrial X-ray Computed Tomography
Steel Object (single feature) | ||||||||
|---|---|---|---|---|---|---|---|---|
Trajectory | Data | Feature | ||||||
Uni18 | Sim | 8.425 | ||||||
Uni180 | Sim | 5.914 | ||||||
Opt18 | Sim | 3.726 | ||||||
Aluminium Cube (multiple features) | ||||||||
Trajectory | Data | Feat 1 | Feat 2 | Feat 3 | Feat 4 | Feat 5 | Feat 6 | Sum |
Uni6 | Sim | 0.596 | 0.423 | 0.732 | 2.766 | 0.514 | 0.751 | 5.783 |
Uni12 | Sim | 0.445 | 0.364 | 0.671 | 0.650 | 0.361 | 0.547 | 3.038 |
Uni18 | Sim | 0.373 | 0.396 | 0.382 | 0.056 | 0.338 | 0.193 | 1.738 |
Opt6 | Sim | 0.134 | 0.114 | 0.475 | 0.190 | 0.133 | 0.096 | 1.142 |
Opt12 | Sim | 0.105 | 0.138 | 0.243 | 0.123 | 0.137 | 0.104 | 0.849 |
Opt18 | Sim | 0.070 | 0.098 | 0.275 | 0.116 | 0.077 | 0.097 | 0.733 |
Uni6 | Real | 0.413 | 0.246 | 0.697 | 0.540 | 0.277 | 0.923 | 3.096 |
Opt6 | Real | 0.104 | 0.107 | 0.332 | 0.414 | 0.128 | 0.184 | 1.269 |
