Table 1 Process conditions used in numerical calculations.
Parameter Set | Laser power (W) | Beam radius (mm) | Scanning speed (mm/s) | Layer thickness (mm) | Substrate thickness (mm) |
|---|---|---|---|---|---|
1 | 190 | 0.5 | 12.5 | 0.38 | 4 |
2 | 600 | 0.5 | 7.5 | 0.25 | 7 |
3 | 1000 | 0.5 | 12.5 | 0.38 | 4 |
Parameter Set | Laser power (W) | Beam radius (mm) | Scanning speed (mm/s) | Layer thickness (mm) | Substrate thickness (mm) |
|---|---|---|---|---|---|
1 | 190 | 0.5 | 12.5 | 0.38 | 4 |
2 | 600 | 0.5 | 7.5 | 0.25 | 7 |
3 | 1000 | 0.5 | 12.5 | 0.38 | 4 |
