Table 3 The mean roughness of printed PCL films.
From: An Investigation of the Behavior of Solvent based Polycaprolactone ink for Material Jetting
The mean roughness value (Ra) (μm) | |||
|---|---|---|---|
Substrate Temperature | Droplet Spacing (μm) | ||
20 μm | 40 μm | 60 μm | |
25 °C | 0.26 ± 0.03 | 0.29 ± 0.06 | 0.25 ± 0.04 |
30 °C | 0.21 ± 0.03 | 0.19 ± 0.02 | 0.21 ± 0.03 |
35 °C | 0.24 ± 0.05 | 0.19 ± 0.03 | N/A |
