Table 1 Parameters used in FEM modeling of heat transfer.
From: Fast Triggering of Shape Memory Polymers using an Embedded Carbon Nanotube Sponge Network
Parameters | Value | Unit |
|---|---|---|
Voltage | 6 × 10−5 | V |
Conductivity (CNT) | 1.29 | S/cm |
Specific heat capacity (CNT) | 0.85 | J/(g·k) |
Specific heat capacity (Polymer) | 0.50 | J/(g·k) |
Inner diameter (CNT) | 20 | nm |
Outer diameter (CNT) | 40 | nm |
Separation distance of CNTs | 120 | nm |
Film layer thermal resistance | 8.3 × 10−5 | K · m2/W |
Thermal conductivity (CNT) | 1000 | W/(m·k) |
Thermal conductivity (Polymer) | 0.2 | W/(m·k) |
