Supplementary Figure 2: Dimensioned drawing of the scWB electrophoresis chamber. | Nature Protocols

Supplementary Figure 2: Dimensioned drawing of the scWB electrophoresis chamber.

From: Single cell–resolution western blotting

Supplementary Figure 2

The scWB electrophoresis chamber is fabricated out of Acrylonitrile butadiene styrene with a fused deposition molding 3D printer (e.g. MakerBot Replicator 2x). The chamber was printed with the cavity facing up and with a raft composed of dissolvable filament. The solid models was produced in SolidWorks and preprocessed in MakerWare.

Back to article page