Abstract
We have synthesized and characterized a looped polymer that is covalently bonded to a surface at both chain termini. We used the ‘grafting to’ method to anchor polydimethylsiloxane (PDMS) onto a Si substrate by making use of triethoxysilyl terminal units. Atomic force microscopy revealed that a linear polymer brush provides a rough surface in water. As water is a poor solvent for PDMS, linear polymer brushes tend to be dewetted, forming aggregates. In contrast, a looped polymer brush surface is smooth in air and water. Aggregation was suppressed in the looped polymer brushes because both ends were tethered to the surface. As surface characteristics, the looped polymer brushes shows low water contact angle hysteresis and low sliding angle. Technologically useful surface properties are provided on the surface by the PDMS coatings.
Similar content being viewed by others
Log in or create a free account to read this content
Gain free access to this article, as well as selected content from this journal and more on nature.com
or
References
Alberty, K. A., Hogen-Esch, T. E. & Carlotti, S. Synthesis and characterization of macrocyclic vinyl-aromatic polymers. Macromol. Chem. Phys. 206, 1035–1042 (2005).
Chen, R., Zhang, X. & Hogen-Esch, T. E. Synthesis and thermal properties of macrocyclic poly(9,9-dimethyl-2-vinylfluorene) containing single 1,4-benzylidene or 9,10-anthracenylidene linking units. Macromolecules 36, 7477–7483 (2003).
McKenna, G. B., Hostetter, B. J., Hadjichristidis, N., Fetters, L. J. & Plazek, D. J. A study of the linear viscoelastic properties of cyclic polystyrenes using creep and recovery measurements. Macromolecules 22, 1834–1852 (1989).
Geiser, D. & Hocker, H. Synthesis and investigation of macrocyclic polystyrene. Macromolecules 13, 653–656 (1980).
Takano, A., Ohta, Y., Masuoka, K., Matsubara, K., Nakano, T., Hieno, A., Itakura, M., Takahashi, K., Kinugasa, S., Kawaguchi, D., Takahashi, Y. & Matsushita, Y. Radii of gyration of ring-shaped polystyrenes with high purity in dilute solutions. Macromolecules 45, 369–373 (2012).
Semlyen, J. A. Cyclic polymers 2nd Edn (Kluwer Academic Publishers, Dordrecht, The Netherlands, 2000).
de Gennes, P. G. Conformations of polymers attached to an interface. Macromolecules 13, 1069–1075 (1980).
Aubouy, M., Guiselin, O. & Raphael, E. Scaling description of polymer interfaces: flat layers. Macromolecules 29, 7261–7268 (1996).
Alonzo, J., Huang, Z., Liu, M., Mays, J. W., Toomey, R. G., Dadmun, M. D. & Michael Kilbey, S. II Looped polymer brushes formed by self-assembly of poly(2-vinylpyridine)-polystyrene-poly(2-vinylpyridine) triblock copolymers at the solid-fluid interface. Kinetics of preferential adsorption. Macromolecules 39, 8434–8439 (2006).
Huang, Z., Ji, H., Mays, J. W. & Dadmun, M. D. Polymer loops vs. brushes on surfaces: adsorption, kinetics, and viscoelastic behavior of α,ω-thiol telechelics on gold. Macromolecules 41, 1009–1018 (2008).
Huang, Z., Ji, H., Mays, J., Dadmun, M., Smith, G., Bedrov, D. & Zhang, Y. Understanding the grafting of telechelic polymers on a solid substrate to form loops. Langmuir 26, 202–209 (2010).
Patton, D., Knoll, W. & Advincula, R. C. Polymer loop formation on a functionalized hard surface: quantitative insight by comparison of experimental and monte carlo simulation results. Macromol. Chem. Phys. 212, 485–497 (2011).
Huang, Z., Alonzo, J., Liu, M., Ji, H., Yin, F., Smith, G. D., Mays, J. W., Michael Kilbey, S. II & Dadmun, M. D. Impact of solvent quality on the density profiles of looped triblock copolymer brushes by neutron reflectivity measurements. Macromolecules 41, 1745–1752 (2008).
Kikuchi, A., Aoyagi, T., Sakurai, Y. & Okano, T. Graft architectural effects on thermoresponsive wettability changes of poly(N-isopropylacrylamide)-modified surfaces. Langmuir 14, 4657–4662 (1998).
Szleifer, I. & Carignano, M. A. Tethered polymer layers: phase transitions and reduction of protein adsorption. Macromol. Rapid Commun. 21, 423–448 (2000).
Huang, J., Koepsel, R. R., Murata, H., Wu, W., Lee, S. B., Kowalewski, T., Russell, A. J. & Matyjaszewski, K. Nonleaching antibacterial glass surfaces via “grafting onto”: the effect of the number of quaternary ammonium groups on biocidal activity. Langmuir 24, 6785–6795 (2008).
Kazama, H., Tezuka, Y. & Imai, K. Syntheses and reactions of uniform size poly(dimethylsiloxane) with various reactive end groups. Polym. J. 19, 1091–1100 (1987).
Advincula, R. C., Brittain, W. J., Caster, K. C. & Ruhe, J. Polymer Brushes, (Wiley-VCH, Weinheim, Germany, 2004).
Klein, J., Kumacheva, E., Mahalu, D., Perahla, D. & Fetters, L. J. Reduction of frictional forces between solid surfaces bearing polymer brushes. Nature 370, 634–636 (1994).
Ayres, N. Polymer brushes: applications in biomaterials and nanotechnology. Polym. Chem. 1, 769–777 (2010).
Ishikawa, T., Kobayashi, M. & Takahara, A. Macroscopic frictional properties of poly(1-(2-methacryloyloxy)ethyl-3-butyl imidazolium bis(trifluoromethanesulfonyl)-imide) brush surfaces in an ionic liquid. Appl. Mater. Interfaces 2, 1120–1128 (2010).
Yamaguchi, H., Kikuchi, M., Kobayashi, M., Ogawa, H., Masunaga, H., Sakata, O. & Takahara, A. Influence of molecular weight dispersity of poly{2-(perfluorooctyl)ethyl acrylate} brushes on their molecular aggregation states and wetting behavior. Macromolecules 45, 1509–1516 (2012).
Dutta, N. & Green, D. Nanoparticle stability in semidilute and concentrated polymer solutions. Langmuir 24, 5260–5269 (2008).
Sheparovych, R., Motornov, M. & Minko, S. Adapting low-adhesive thin films from mixed polymer brushes. Langmuir 24, 13828–13832 (2008).
Lee, J. N., Park, C. & Whitesides, G. M. Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices. Anal. Chem. 75, 6544–6554 (2003).
Yamamoto, S., Ejaz, M., Tsujii, Y. & Fukuda, T. Surface interaction forces of well-defined, high-density polymer brushes studied by atomic force microscopy. 2. effect of graft density. Macromolecules 33, 5608–5612 (2000).
Tsujii, Y., Ohno, K., Yamamoto, S., Goto, A. & Fukuda, T. Structure and properties of high-density polymer brushes prepared by surface-initiated living radical polymerization. Adv. Polym. Sci. 197, 1–45 (2006).
Barbey, R., Lavanant, L., Paripovic, D., Schuwer, N., Sugnaux, C., Tugulu, S. & Klok, H.-A. Polymer brushes via surface-initiated controlled radical polymerization: synthesis, characterization, properties, and applications. Chem. Rev. 109, 5437–5527 (2009).
Jones, R. G., Ando, W. & Chojnowski, J. Silicon-Containing Polymers, (Kluwer Academic Publishers, Dordrecht, The Netherlands, 2000).
Norizoe, Y., Jinnai, H. & Takahara, A. Molecular simulation of 2-dimensional microphase separation of single-component homopolymers grafted onto a planar substrate. Europhys. Lett. 101, 16006-p1–16006-p6 (2013).
Cheng, D. F., Urata, C., Yagihashi, M. & Hozumi, A. A statically oleophilic but dynamically oleophobic smooth nonperfluorinated surface. Angew. Chem. Int. Ed. 51, 2956–2959 (2012).
Acknowledgements
The authors thank Professor H. Jinnai and Dr J. Nishida (both of Kyushu University) for helpful discussions.
Author information
Authors and Affiliations
Corresponding author
Additional information
Supplementary Information accompanies the paper on Polymer Journal website
Supplementary information
Rights and permissions
About this article
Cite this article
Sakurai, S., Watanabe, H. & Takahara, A. Preparation and characterization of looped polydimethylsiloxane brushes. Polym J 46, 117–122 (2014). https://doi.org/10.1038/pj.2013.69
Received:
Revised:
Accepted:
Published:
Issue date:
DOI: https://doi.org/10.1038/pj.2013.69
Keywords
This article is cited by
-
Liquid-like polymer lubricating surfaces: Mechanism and applications
Nano Research (2024)
-
Towards controlled polymer brushes via a self-assembly-assisted-grafting-to approach
Nature Communications (2016)
-
Biomineralization-inspired approach to the development of hybrid materials: preparation of patterned polymer/strontium carbonate thin films using thermoresponsive polymer brush matrices
Polymer Journal (2014)
