Table 7 Gear geometry parameters.
From: Sensitivity analysis and compensation for tooth surface deviation of spiral bevel gear machine tool
Type of parameters | numerical value |
|---|---|
Tooth number (Z1) | 18 |
Module of large end (mt /mm) | 4.29 |
Gear width (wb /mm) | 45 |
Handed | left |
Mean spiral angle (β /°) | 35 |
Addendum (ha /mm) | 8.78 |
Tooth dedendum (hf /mm) | 5.03 |
Pitch angle (γ1 /°) | 27.21 |
Face angle (γp /°) | 31.65 |
Root angle (γf /°) | 25.36 |
Outer cone distance (Lo/mm) | 140.9 |
