Table 1 Comparison of the sensitivity, limit of detection, and linear range of fabricated ZnFe(PBA)@Ti3C2Tx glucose sensor material with earlier reported sensor materials.
Electrode Material | Sensitivity (µA mM−1 cm−2) | Limit of Detection (µM) | Linear range (mM) | Analytical Technique | Ref. |
|---|---|---|---|---|---|
Pt@MXene | 3.43 | 29.1 | 0.0–8.0 | CA | |
NPC@MXene | 100.8 | 7.0 | 0.03 − 1.5 | CA | |
ZnO@MXene | 29.0 | 17.0 | 0.05–0.7 | CA | |
Cu2O/MXene/rGO | 264.52 | 1.1 | 0.1–14 | CA | |
Au@CuO/V2CTx MXene/LIG | 1.124 × 106 | 1.8 | 0.005–5.0 | CA | |
Au/rGO-Ti3C2 | 355 | 3.1 | 0.01–21 | CA | |
PEDOT: PSS/MXene/ GOx/GCE | 21.7 | 1.9 | 1–94 | CA | |
Co3O4@N-Doped Graphene | 143 | 0.48 | 0.01–11 | CA | |
ZnFe2O4/α-Fe2O3 @Graphene | 609.0 | - | 1–10.0 | CA | |
ZnFe(PBA)@Ti3C2Tx | 973.4 | 3.0 | 0.01–1.0 | CA | This Work |
