Fig. 9 | Scientific Reports

Fig. 9

From: The prediction of the effects of non-isothermal molding/reprocessing on the crystallinity and mechanical properties of PEEK and CF/PEEK

Fig. 9

The side appearance (1), tensile test fracture appearance (2), as well as the shear test fracture appearance (3) of CF/PEEK under four typical processing parameters: (a) T = 360 °C, Φ = 1 °C/min, (b) T = 360 °C, Φ = 500 °C/min, (c) T = 360 °C, Φ = 1800 °C/min, and (d)T = 400 °C, Φ = 500 °C/min.

Back to article page