Table 1 ASTM samples imaged and tensile tested (SN Serial Number, ell. ellipsoid; major radius, y-position, and order is illustrated in Fig. 1).
SN | Major radius (\(\upmu\)m) | y-position [mm] | Order |
|---|---|---|---|
1 | 300 | 55 (gauge) | 1 (8 ell.) |
2 | 300 | 55 (gauge) | 2 (64 ell.) |
4 | 400 | 55 (gauge) | 2 (64 ell.) |
6 | 300 | 85 (tail) | 2 (64 ell.) |
7 | 300 | 85 (tail) | 3 (512 ell.) |
8 | 400 | 85 (tail) | 2 (64 ell.) |
91 | 200 | 55 (gauge) | 1 (8 ell.) |
92 | 400 | 55 (gauge) | 1 (8 ell.) |
93 | 200 | 55 (gauge) | 2 (64 ell.) |
94 | 400 | 55 (gauge) | 2 (64 ell.) |
95 | 200 | 85 (tail) | 1 (8 ell.) |
96 | 400 | 85 (tail) | 1 (8 ell.) |
97 | 200 | 85 (tail) | 2 (64 ell.) |
98 | 400 | 85 (tail) | 2 (64 ell.) |
99 | 600 | 85 (tail) | 2 (64 ell.) |
