Table 4 The degradation efficiency of atrazine by bimetallic oxide persulfate activation catalysts under experimental conditions.
From: Efficient atrazine degradation through ZnFe2O4-catalyzed peroxymonosulphate activation
Bimetallic catalysts | Reaction conditions | Ref. | ||||
|---|---|---|---|---|---|---|
Catalyst dosage (mg/L) | CInitial ATZ (µM) | CPMS (mM) | Time (min) | Removal rate (%) | ||
CuO-Fe2O3 | 100 | 46 | 0.37 | 30 | 66.5 | Xu et al. 2022 |
NiCo2S4 | 40 | 46 | 0.4 | 10 | 99.6 | Zhu et al. 2023 |
NiCo2O4 | 40 | 46 | 0.4 | 10 | 26.7 | Zhu et al. 2023 |
CoFe2O4 | 400 | 46 | 0.8 | 30 | 99 | Li et al. 2018 |
Cu-doped LaFeO3 | 500 | 23 | 0.5 | 60 | 100 | Wang et al. 2019 |
Bi2MoO6 | 100 | 46 | 0.92 | 60 | 99 | Shen et al.,2020 |
ZnFe2O4 | 500 | 20 | 0.33 | 30 | 86 | This work |
