Fig. 1: Schematic of the SAMBADENA setup. | Communications Chemistry

Fig. 1: Schematic of the SAMBADENA setup.

From: Rapid in situ carbon-13 hyperpolarization and imaging of acetate and pyruvate esters without external polarizer

Fig. 1

a A fluid control unit with two manometers, four electric solenoid valves (V1-V4), and one hand valve was used to inject the fluids and pH2 at the bottom (labeled as V1 in Supplementary Fig. 1a) of the reactor and to create backpressure with N2 or release pressure on top (labeled as V2 in Supplementary Fig. 1a). The liquid chamber was held in the isocenter of the MRI system. b Drawing of the SAMBADENA setup with magnification to show the new PEEK reactor installed in the MRI system (cross-sectioned). Note that this reactor is designed to be compatible with a mouse bed setup, as utilized in our previous in vivo experiments56.

Back to article page