Fig. 2: DSC Curves for PCL/PVDF blends. | npj Advanced Manufacturing

Fig. 2: DSC Curves for PCL/PVDF blends.

From: Material and surface roughness effects on adhesion of thermoplastic-elastomeric interfaces for dissimilar material 3D printing

Fig. 2

DSC curves around the PVDF melting point for the physically mixed 5% (A), 7.5% (B), and 10% (C) PCL filaments and the solvent-mixed 10% (D) PCL filament. Given the melting point of neat PVDF (173.03 °C), the melting point depression is seen in all filaments and all locations to varying degrees. The 5% (168.15 °C) and 10% (167.71 °C) solvent mixed feedstocks showed lower melting points than their respective filaments.

Back to article page