Abstract
Plant bodies consist of many cells. Each cell contains a cell wall and a cell membrane, which are involved in maintaining the turgor pressure to bear the weight of the plant body. Inspired by this framework, we prepared a gel material enclosed in many compartments. According to this concept, hydrogels reinforced by polymer foam were fabricated using a simple method, and their mechanical properties were investigated. A piece of polymer foam was immersed in an aqueous solution of a water-soluble monomer in the presence of an initiator and a crosslinker. We used sodium acrylate as a monomer, N,N′-methylenebisacrylamide as a crosslinker, 2,2′-azobis(2-methylpropionamidine) dihydrochloride as an initiator and polyurethane foam as a reinforcing material. After gelation, the mechanical properties of the composite gel were analyzed by compression testing. The compression strength of the composite gel was ∼2 MPa, which was much higher than that of the poly(sodium acrylate) (PSA) hydrogel alone. The compression modulus was also considerably higher than for each constituent material alone (both hydrogel and foam). When melamine foam was used in place of polyurethane foam, the mechanical properties of the composite gel significantly deteriorated.
Similar content being viewed by others
Log in or create a free account to read this content
Gain free access to this article, as well as selected content from this journal and more on nature.com
or
References
Liu, K., Ovaert, T. C. & Mason, J. J. Preparation and mechanical characterization of a PNIPA hydrogel composite. J. Mater. Sci.: Mater. Med. 19, 1815–1821 (2008).
Gong, J. P., Katsuyama, Y., Kurokawa, T. & Osada, Y. Double-network hydrogels with extremely high mechanical strength. Adv. Mater. 15, 1155–1158 (2003).
Okumura, Y. & Ito, K. The polyrotaxane gel: a topological gel by figure-of-eight cross-links. Adv. Mater. 13, 485–487 (2001).
Haraguchi, K. & Takehisa, T. Nanocomposite hydrogels: a unique organic–inorganic network structure with extraordinary mechanical, optical, and swelling/de-swelling properties. Adv. Mater. 14, 1120–1124 (2002).
Sakai, T., Matsunaga, T., Yamamoto, Y., Ito, C., Yoshida, R., Suzuki, S., Sasaki, N., Shibayama, M. & Chung, U.-i. Design and fabrication of a high-strength hydrogel with ideally homogeneous network structure from tetrahedron-like macromonomers. Macromolecules 41, 5379–5384 (2008).
DeRossi, D., Kajiwara, K., Osada, Y. & Yamauchi, A. Polymer Gels: Fundamentals and Biomedical Applications eds DeRossi D., Kajiwara K., Osada Y., Yamauchi A., (Plenum Press, New York, NY, USA, 1991).
Jagur-Grodzinski, J. Polymeric gels and hydrogels for biomedical and pharmaceutical applications. Polym. Adv. Technol. 21, 27–47 (2010).
Haque, M. A., Kurokawa, T. & Gong, J. P. Super tough double network hydrogels and their application as biomaterials. Polymer 53, 1805–1822 (2012).
Liu, L. S., Kost, J., Yan, F. & Spiro, R. C. Hydrogels from biopolymer hybrid for biomedical, food, and functional food applications. Polymers 4, 997–1011 (2012).
Young, C.-D., Wu, J.-R. & Tsou, T.-L. High-strength, ultra-thin and fiber-reinforced pHEMA artificial skin. Biomaterials 19, 1745–1752 (1998).
Zhou, C. & Wu, Q. A novel polyacrylamide nanocomposite hydrogel reinforced with natural chitosan nanofibers. Colloids Surf. B: Biointerfaces 84, 155–162 (2011).
Teramoto, N., Hayashi, A., Yamanaka, K., Sakiyama, A., Nakano, A. & Shibata, M. Preparation and mechanical properties of photo-crosslinked fish gelatin/imogolite nanofiber composite hydrogel. Materials 5, 2573–2585 (2012).
Agrawal, A., Rahbar, N. & Calvert, P. D. Strong fiber-reinforced hydrogel. Acta Biomater. 9, 5313–5318 (2013).
Nakayama, A., Kakugo, A., Gong, J. P., Osada, Y., Takai, M., Erata, T. & Kawano, S. High Mechanical Strength Double-Network Hydrogel with Bacterial Cellulose. Adv. Funct. Mater. 14, 1124–1128 (2004).
Buyanov, A. L., Gofman, I. V., Revel'skaya, L. G., Khripunov, A. K. & Tkachenko, A. A. Anisotropic swelling and mechanical behavior of composite bacterial cellulose-poly(acrylamide or acrylamide-sodium acrylate) hydrogels. J. Mech. Behav. Biomed. Mater. 3, 102–111 (2010).
Borges, A. C., Eyholzer, C., Duc, F., Bourban, P.-E., Tingaut, P., Zimmermann, T., Pioletti, D. P. & Månson, J.-A. E. Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus. Acta Biomater. 7, 3412–3421 (2011).
Bokhari, M. A., Akay, G., Zhang, S. & Birch, M. A. The enhancement of osteoblast growth and differentiation in vitro on a peptide hydrogel-polyHIPE polymer hybrid material. Biomaterials 26, 5198–5208 (2005).
Niazi, J. H. & Karegoudar, T. B. Degradation of dimethylphthalate by cells of Bacillus sp. immobilized in calcium alginate and polyurethane foam. J. Environ. Sci. Health, Part A 36, 1135–1144 (2001).
Sone, H., Fugetsu, B. & Tanaka, S. Selective elimination of lead(II) ions by alginate/polyurethane composite foams. J. Hazard. Mater. 162, 423–429 (2009).
Hron, P., Šlechtová, J., Smetana, K., Dvořánková, B. & Lopour, P. Silicone rubber-hydrogel composites as polymeric biomaterials: IX. Composites containing powdery polyacrylamide hydrogel. Biomaterials 18, 1069–1073 (1997).
Zhang, L., Wang, Z., Xu, C., Li, Y., Gao, J., Wang, W. & Liu, Y. High strength graphene oxide/polyvinyl alcohol composite hydrogels. J. Mater. Chem. 21, 10399–10406 (2011).
Qin, X., Zhao, F., Liu, Y., Wang, H. & Feng, S. High mechanical strength hydrogels preparation using hydrophilic reactive microgels as crosslinking agents. Colloid Polym. Sci. 287, 621–625 (2009).
Buyanov, A. L., Gofman, I. V., Khripunov, A. K., Tkachenko, A. A. & Ushakova, E. E. High-strength biocompatible hydrogels based on poly(acrylamide) and cellulose: Synthesis, mechanical properties and perspectives for use as artificial cartilage. Polym. Sci. Ser. A 55, 302–312 (2013).
Petrini, P., Farè, S., Piva, A. & Tanzi, M. C. Design, synthesis and properties of polyurethane hydrogels for tissue engineering. J. Mater. Sci.: Mater. Med. 14, 683–686 (2003).
Djonlagić, J., Žugić, D. & Petrović, Z. High strength thermoresponsive semi-IPN hydrogels reinforced with nanoclays. J. Appl. Polym. Sci. 124, 3024–3036 (2012).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Teramoto, N., Shigehiro, O., Ogawa, Y. et al. Polymer foam-reinforced hydrogels inspired by plant body frameworks as high-performance soft matter. Polym J 46, 592–597 (2014). https://doi.org/10.1038/pj.2014.41
Received:
Revised:
Accepted:
Published:
Issue date:
DOI: https://doi.org/10.1038/pj.2014.41
Keywords
This article is cited by
-
Viscoelastic properties of a novel hydrogel/foam composites for nucleus pulposus replacement
SN Applied Sciences (2019)
-
Morphing in nature and beyond: a review of natural and synthetic shape-changing materials and mechanisms
Journal of Materials Science (2016)
