Abstract
The recent progress of our research on anion-exchange membranes (AEMs) for alkaline fuel cell applications is reviewed. The anion conductivity and the mechanical, thermal and chemical stability of AEMs are insufficient. To address these issues, we have designed and synthesized a novel series of poly(arylene ether)-based AEMs with quaternized ammonium groups. First, the effect of the sequence of the polymer main chain (random or block) on the AEM properties, especially the anion conductivity, is discussed. We emphasize that fluorenyl groups serve effectively as scaffolds for the ammonium groups. We then discuss the alkaline stability of both the polymer backbone and the quaternized ammonium groups. Partial fluorination improves the alkaline stability of the polymer main chains. Among the several ammonium groups investigated, we propose that pyridinium groups are seemingly more stable than the typical aliphatic ammonium (for example, trimethylammonium) groups. The results imply that aromatic AEMs are potentially applicable to alkaline fuel cells that use hydrogen or hydrazine as a fuel.
Similar content being viewed by others
Log in or create a free account to read this content
Gain free access to this article, as well as selected content from this journal and more on nature.com
or
References
Varcoe, J. R. & Slade, R. C. T. Prospects for alkaline anion-exchange membranes in low temperature fuel cells. Fuel Cells 5, 187–200 (2005).
Pan, J., Chen, C., Zhuang, L. & Lu, J. Designing advanced alkaline polymer electrolytes for fuel cell applications. Acc. Chem. Res. 45, 473–481 (2012).
Leng, Y., Chen, G., Mendoza, A. J., Tighe, T. B., Hickner, M. A. & Wang, C.-Y. Solid-state water electrolysis with an alkaline membrane. J. Am. Chem. Soc. 134, 9054–9057 (2012).
Pavel, C. C., Cecconi, F., Emiliani, C., Santiccioli, S., Scaffidi, A., Catanorchi, S. & Comotti, M. Highly efficient platinum group metal free based membrane-electrode assembly for anion exchange membrane water electrolysis. Angew. Chem. Int. Ed. 53 (5), 1378–1381 (2014).
Li, X., Zhang, H., Mai, Z., Zhang, H. & Vankelecom, I. Ion exchange membranes for vanadium redox flow battery (VRB) applications. Energy Environ. Sci. 4, 1147–1160 (2011).
Chen, D., Hickner, M. A., Agar, E. & Kumbur, E. C. Optimized anion exchange membranes for vanadium redox flow batteries. ACS Appl. Mater. Interfaces 5, 7559–7566 (2013).
Sata, T. Studies on anion exchange membranes having permselectivity for specific anions in electrodialysis-effect of hydrophilicity of anion exchange membranes on permselectivity of anions. J. Membr. Sci. 167, 1–31 (2000).
Swager, T. M. The molecular wire approach to sensory signal amplification. Acc. Chem. Res. 31, 201–207 (1998).
Ho, H.-A., Najari, A. & Leclerc, M. Optical detection of DNA and proteins with cationic polythiophenes. Acc. Chem. Res. 41, 168–178 (2008).
Hickner, M. A. Ion-containing polymers: new energy & clean water. Mater. Today 13, 34–41 (2010).
Hickner, M. A., Herring, A. M. & Coughlin, E. B. Anion exchange membranes: current status and moving forward. J. Polym. Sci. Part B Polym. Phys. 51, 1727–1735 (2013).
Park, C. H., Lee, C. H., Guiver, M. D. & Lee, Y. M. Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs). Prog. Polym. Sci. 36, 1443–1498 (2011).
Zhang, H. & Shen, P. K. Recent development of polymer electrolyte membranes for fuel cells. Chem. Rev. 112, 2780–2832 (2012).
Lu, S., Pan, J., Huang, A., Zhuang, L. & Lu, J. Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts. Proc. Natl Acad. Sci. USA 105, 20611–20614 (2008).
Couture, G., Alaaeddine, A., Boschet, F. & Ameduri, B. Polymeric materials as anion-exchange membranes for alkaline fuel cells. Prog. Polym. Sci. 36, 1521–1557 (2011).
Merle, G., Wessling, M. & Nijmeijer, K. Anion exchange membranes for alkaline fuel cells: a review. J. Membr. Sci. 377, 1–35 (2011).
Chempath, S., Boncella, J. M., Pratt, L. R., Henson, N. & Pivovar, B. S. Density functional theory study of degradation of tetraalkylammonium hydroxides. J. Phys. Chem. C 114, 11977–11983 (2010).
Zhang, Q., Li, S. & Zhang, S. A novel guanidinium grafted poly(aryl ether sulfone) for high-performance hydroxide exchange membranes. Chem. Commun. 46, 7495–7497 (2010).
Lin, B., Dong, H., Li, Y., Si, Z., Gu, F. & Yan, F. Alkaline stable C2-substituted imidazolium-based anion-exchange membranes. Chem. Mater. 25, 1858–1867 (2013).
Huang, A., Xia, C., Xiao, C. & Zhuang, L. Composite anion exchange membrane for alkaline direct methanol fuel cell: structural and electrochemical characterization. J. Appl. Polym. Sci. 100, 2248–2251 (2006).
Zhang, B., Gu, S., Wang, J., Liu, Y., Herring, A. M. & Yan, Y. Tertiary sulfonium as a cationic functional group for hydroxide exchange membranes. RSC Adv. 2, 12683–12685 (2012).
Noonan, K. J. T., Hugar, K. M., Kostalik, H. A. IV, Lobkovsky, E. B., Abruña, H. D. & Coates, G. W. Phosphonium-functionalized polyethylene: a new class of base-stable alkaline anion exchange membranes. J. Am. Chem. Soc. 134, 18161–18164 (2012).
Zha, Y., Disabb-Miller, M. L., Johnson, Z. D., Hickner, M. A. & Tew, G. N. Metal-cation-based anion exchange membranes. J. Am. Chem. Soc. 134, 4493–4496 (2012).
Tomoi, M., Yamaguchi, K., Ando, R., Kantake, Y., Aosaki, Y. & Kubota, H. Synthesis and thermal stability of novel anion exchange resins with spacer chains. J. Appl. Polym. Sci. 64, 1161–1167 (1997).
Robertson, N. J., Kostalik, H. A. IV, Clark, T. J., Mutolo, P. F., Abruna, H. D. & Coates, G. W. Tunable high performance cross-linked alkaline anion exchange membranes for fuel cell applications. J. Am. Chem. Soc. 132, 3400–3404 (2010).
Hibbs, M. R. Alkaline stability of poly(phenylene)-based anion exchange membranes with various cations. J. Polym. Sci. Part B Polym. Phys. 51, 1736–1742 (2013).
Li, N., Leng, Y., Hickner, M. A. & Wang, C.-Y. Highly stable, anion conductive, comb-shaped copolymers for alkaline fuel cells. J. Am. Chem. Soc. 135, 10124–10133 (2013).
Nuñez, S. A. & Hickner, M. A. Quantitative 1H NMR analysis of chemical stabilities in anion-exchange membranes. ACS Macro. Lett. 2, 49–52 (2013).
Arges, C. G. & Ramani, V. Two-dimensional NMR spectroscopy reveals cation-triggered backbone degradation in polysulfone-based anion exchange membranes. Proc. Natl Acad. Sci. USA 110, 2490–2495 (2013).
Tanaka, M., Koike, M., Miyatake, K. & Watanabe, M. Anion conductive aromatic ionomers containing fluorenyl groups. Macromolecules 43, 2657–2659 (2010).
Tanaka, M., Koike, M., Miyatake, K. & Watanabe, M. Synthesis and properties of anion conductive ionomers containing fluorenyl groups for alkaline fuel cell applications. Polym. Chem. 2, 99–106 (2011).
Tanaka, M., Fukasawa, K., Nishino, E., Yamaguchi, S., Yamada, K., Tanaka, H., Bae, B., Miyatake, K. & Watanabe, M. Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells. J. Am. Chem. Soc. 133, 10646–10654 (2011).
Ono, H., Miyake, J., Bae, B., Watanabe, M. & Miyatake, K. Synthesis and properties of partially fluorinated poly(arylene ether) block copolymers containing ammonium groups as anion conductive membranes. Bull. Chem. Soc. Jpn. 86, 663–670 (2013).
Miyake, J., Fukasawa, K., Watanabe, M. & Miyatake, K. Effect of ammonium groups on the properties and alkaline stability of poly(arylene ether)-based anion exchange membranes. J. Polym. Sci. Part A Polym. Chem. 52, 383–389 (2014).
Miyatake, K., Chikashige, Y., Higuchi, E. & Watanabe, M. Tuned polymer electrolyte membranes based on aromatic polyethers for fuel cell applications. J. Am. Chem. Soc. 129, 3879–3887 (2007).
Bae, B., Miyatake, K. & Watanabe, M. Effect of the hydrophobic component on the properties of sulfonated poly(arylene ether sulfone)s. Macromolecules 42, 1873–1880 (2009).
Bae, B., Miyatake, K. & Watanabe, M. Synthesis and properties of sulfonated block copolymers having fluorenyl groups for fuel-cell applications. ACS Appl. Mater. Interfaces 1, 1279–1286 (2009).
Bae, B., Yoda, T., Miyatake, K., Uchida, H. & Watanabe, M. Proton-conductive aromatic ionomers containing highly sulfonated blocks for high-temperature-operable fuel cells. Angew. Chem. Int. Ed. 49, 317–320 (2010).
Bae, B., Miyatake, K. & Watanabe, M. Sulfonated poly(arylene ether sulfone ketone) multiblock copolymers with highly sulfonated block. Synthesis and properties. Macromolecules 43, 2684–2691 (2010).
Miyatake, K., Hirayama, D., Bae, B. & Watanabe, M. Block poly(arylene ether sulfone ketone)s containing densely sulfonated linear hydrophilic segments as proton conductive membranes. Polym. Chem. 3, 2517–2522 (2012).
Miyake, J., Watanabe, M. & Miyatake, K. Sulfonated poly(arylene ether phosphine oxide ketone) block copolymers as oxidatively stable proton conductive membranes. ACS Appl. Mater. Interfaces 5, 5903–5907 (2013).
Akiyama, R., Hirayama, D., Saito, M., Miyake, J., Watanabe, M. & Miyatake, K. Proton conductive aromatic block copolymers from a new bistriazole monomer. RSC Adv. 3, 20202–20208 (2013).
Acknowledgements
This work was partly supported by the Ministry of Education, Culture, Sports, Science and Technology of Japan through a Grant-in-Aid for Scientific Research (23350089).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Miyake, J., Watanabe, M. & Miyatake, K. Ammonium-functionalized poly(arylene ether)s as anion-exchange membranes. Polym J 46, 656–663 (2014). https://doi.org/10.1038/pj.2014.56
Received:
Revised:
Accepted:
Published:
Issue date:
DOI: https://doi.org/10.1038/pj.2014.56
