Fig. 2: Effects of the oil temperature and linear speed during thermally induced wet spinning on the morphology and properties of PDMS fibers. | NPG Asia Materials

Fig. 2: Effects of the oil temperature and linear speed during thermally induced wet spinning on the morphology and properties of PDMS fibers.

From: Rapid mold-free fabrication of long functional PDMS fibers

Fig. 2

a Optical and FE-SEM images and b fiber width and cross-sectional area at various oil temperatures. c Optical and FE-SEM images, d fiber width and cross-sectional area, e dTG characteristics, and f stress–strain curves at various linear speeds.

Back to article page