Abstract
An immiscible blend of isotactic polypropylene (PP) and ethylene-butene-1 copolymer (EB) (PP/EB = 70/30) containing a small amount of N,N'-dicyclohexyl-2,6-naphthalene dicarboxamide as a nucleating agent for β-form crystals was prepared by T-die extrusion. We successfully prepared an extruded sheet in which the orientation of the PP molecules is perpendicular to the deformation of the EB particles, i.e., the β-form crystals of PP are predominantly oriented perpendicular to the flow direction of the sheet plane (the transverse direction, TD), whereas the EB droplets are strongly deformed in the flow direction. It should be noted that EB barely affects the crystalline form and orientation of PP. This extraordinary structure provides unique mechanical anisotropy. The tear strength of the TD sample is significantly enhanced by the anomalous crack propagation in the machine direction (MD). Moreover, the anisotropy in tensile properties, such as the Young’s modulus, yield stress, strain at break, and dynamic tensile modulus, is reduced.
Similar content being viewed by others
Log in or create a free account to read this content
Gain free access to this article, as well as selected content from this journal and more on nature.com
or
References
Bates FS, Fredrickson GH. Conformational asymmetry and polymer-polymer thermodynamics. Macromolecules. 1994;27: 1065–7.
Yamaguchi M, Miyata H, Nitta K-H. Compatibility of binary blends of polypropylene with ethylene-α-olefin copolymer. J Appl Polym Sci. 1996;62:87–97.
Weimann PA, Jones TD, Hillmyer MA, Bates FS, Londono JD, Melnichenko Y, Wignall GD, Almdal K. Phase behavior of isotactic polypropylene-poly(ethylene/ethylethylene) random copolymer blends. Macromolecules. 1997;30:3650–7.
Carriere CJ, Silvis HC. The effects of short-chain branching and comonomer type on the interfacial tension of polypropylene-polyolefin elastomer blends. J Appl Polym Sci. 1997;66:1175–81.
Yamaguchi M, Nitta K-H, Miyata H, Masuda T. Rheological properties for binary blends of i-PP and ethylene-1-hexene copolymer. J Appl Polym Sci. 1997;63:467–74.
Yamaguchi M, Miyata H, Nitta K-H. Structure and properties for binary blends of isotactic polypropylene with ethylene-α-olefin copolymer. 1. Crystallization and morphology. J Polym Sci B Polym Phys. 1997;35:953–61.
Thomann Y, Suhm J, Thomann R, Bar G, Maier RD, Mülhaupt R. Investigation of morphologies of one- and two-phase blends of isotactic poly(propene) with random poly(ethane-co-1-butene). Macromolecules. 1998;31:5441–9.
Lohse DJ, Graessley WW. Thermodynamics of polyolefin blends. In: Paul DR, Bucknall CB editors. Ch. 8. John Wiley & Sons, New York, NY, USA:John Wiley & Sons;1999. p. 219–37.
Yamaguchi M, Miyata H. Influence of stereoregularity of polypropylene on miscibility with ethylene-1-hexene copolymer. Macromolecules. 1999;32:5911–6.
Yamaguchi M, Suzuki K-I, Miyata H. Structure and mechanical properties for binary blends of polypropylene and ethylene-1-hexene copolymer. J. Polym. Sci. B Polym Phys. 1999;37: 701–13.
Bedia EL, Murakami S, Senoo K, Kohjiya S. Structural development and mechanical properties on immiscible and miscible blends from isotactic polypropylene and ethylene-1-hexene copolymers under uniaxial drawing. Polym (Guildf). 2002;43:749–55.
Jones TD, Chaffin KA, Bates FS. Effect of tacticity on coil dimensions and thermodynamic properties of polypropylene. Macromolecules. 2002;35:5061–8.
Pasquini N. Polypropylene morphology. In: Pasquini N, editor. Ch. 3. 2nd ed. Hanser, Munich, Germany:Hanser; 2005. p. 153–94.
Lohse DJ. The Influence of chemical structure on polyolefin melt rheology and miscibility. J Macromol Sci Polym Rev. 2005;45: 289–308.
Nitta KH, Yamaguchi M. Morphology and mechanical properties in iPP/polyolefin-based copolymer blend. In: Nwabunma D, Kyu T, editors. Ch. 9. New Jersey, USA: John Wiley & Sons; 2008. p. 224–68.
Yang J, White JL. Crystallization behavior of polypropylene/ethylene-butene copolymer blends. J Appl Polym Sci. 2012;126:2049–58.
Xu J, Mittal V, Bates FS. Toughened isotactic polypropylene: Phase behavior and mechanical properties of blends with strategically designed random copolymer modifiers. Macromolecules. 2016;49:6497–506.
Lin Y, Chen H, Chan C-M, Wu J. High impact toughness polypropylene/CaCO3 nanocomposites and the toughening mechanism. Macromolecules. 2008;41:9204–13.
Wiwattananukul R, Fan B, Yamaguchi M. Improvement of rigidity for rubber-toughened polypropylene via localization of carbon nanotubes. Comp Sci Technol. 2017;141:106–12.
Feng Y, Jin X, Hay JN. Effect of nucleating agent addition on crystallization of isotactic polypropylene. J Appl Polym Sci. 1998;69:2089–95.
Varga J, Mudra I, Ehrenstein GW. Highly active thermally stable β-nucleating agents for isotactic polypropylene. J Appl Polym Sci. 1999;74:2357–68.
Jang G-S, Cho W-J, Ha C-S. Crystallization behavior of polypropylene with or without sodium benzoate as a nucleating agent. J Polym Sci B Polym Phys. 2001;39:1001–16.
Marco C, Gomez MA, Ellis G, Arribas JM. Activity of a β-nucleating agent for isotactic polypropylene and its influence on polymorphic transitions. J Appl Polym Sci. 2002;86:531–9.
Zhu P-W, Tung J, Phillips A, Edward G. Morphological development of oriented isotactic polypropylene in the presence of a nucleating agent. Macromolecules. 2006;39:1821–31.
Liu M, Guo B, Du M, Chen F, Jia D. Halloysite nanotubes as a novel β-nucleating agent for isotactic polypropylene. Polym (Guildf). 2009;50:3022–30.
Kerscha M, Schmidtb HW, Altstädta V. Influence of different beta-nucleating agents on the morphology of isotactic polypropylene and their toughening effectiveness. Polym (Guildf). 2016;98:320–6.
Romankiewicz A, Sterzynski T, Brostow W. Structural characterization of α- and β-nucleated isotactic polypropylene. Polym Int. 2004;53:2086–91.
Zhang YF, Luo XX, Zhu L, Yang XJ, Chang Y. Effects of α/β compound nucleating agents on mechanical properties and crystallization behaviors of isotactic polypropylene. J Macromol Sci B. 2012;51:2352–60.
Phulkerd P, Arayachukeat S, Huang T, Inoue T, Nobukawa S, Yamaguchi M. Melting point elevation of isotactic polypropylene. J Macromol Sci B. 2014;53:1222–30.
Uchiyama Y, Iwasaki S, Ueoka C, Fukui T, Okamoto K, Yamaguchi M. Molecular orientation and mechanical anisotropy of polypropylene sheet containing N,N’-dicyclohexyl-2,6-naphthalenedicarboxamide. J Polym Sci B Polym Phys. 2009;47:424–33.
Yamaguchi M, Fukui T, Okamoto K, Sasaki S, Uchiyama Y, Ueoka C. Anomalous molecular orientation of isotactic polypropylene sheet containing N,N’-dicyclohexyl-2,6-naphthalenedicarboxamide. Polym (Guildf). 2009;50:1497–504.
Yamaguchi M, Irie Y, Phulkerd P, Hagihara H, Hirayama S, Sasaki S. Plywood-like structure of injection-moulded polypropylene. Polym (Guildf). 2010;51:5983–9.
Phulkerd P, Nobukawa S, Uchiyama Y, Yamaguchi M. Anomalous mechanical anisotropy of β form polypropylene sheet with N,N’-dicyclohexyl-2,6-naphthalene- dicarboxamide. Polym (Guildf). 2011;52:4867–72.
Phulkerd P, Hagihara H, Nobukawa S, Uchiyama Y, Yamaguchi M. Plastic deformation behavior of polypropylene sheet with transversal orientation. J Polym Sci B Polym Phys. 2013;51: 897–906.
Phulkerd P, Hirayama S, Nobukawa S, Inoue T, Yamaguchi M. Structure and mechanical anisotropy of injection-molded polypropylene with a plywood structure. Polym J. 2014;46:226–33.
Varga J, Mudra I, Ehrensten GW. Highly active thermally stable β-nucleating agents for isotactic polypropylene. J Appl Polym Sci. 1999;74:2357–68.
Grein C, Gahleitner M. On the influence of nucleation on the toughness of iPP/EPR blends with different rubber molecular architectures. Express Polym Lett. 2008;2:392–7.
Chen Y, Yang S, Yang H, Zhang M, Zhang Q, Li Z. Toughness reinforcement in carbon nanotube-filled high impact polypropylene copolymer with β‑nucleating agent. Ind Eng Chem Res. 2016;55:8733–42.
Sato S, Maeda T, Yamaguchi M. Control of chain orientation in blends of polypropylene and polybutene-1. Macromol Mater Eng. 2017;302:1600413–1600421.
Li JX, Cheung WL, Jia D. A study on the heat of fusion of β-polypropylene. Polym (Guildf). 1999;40:1219–22.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no competing financial interests.
Rights and permissions
About this article
Cite this article
Phulkerd, P., Funahashi, Y., Ito, A. et al. Perpendicular orientation between dispersed rubber and polypropylene molecules in an oriented sheet. Polym J 50, 309–318 (2018). https://doi.org/10.1038/s41428-017-0017-3
Received:
Revised:
Accepted:
Published:
Version of record:
Issue date:
DOI: https://doi.org/10.1038/s41428-017-0017-3
